Minelab Excalibur Ii: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Minelab Excalibur II Information

the information about the Minelab Excalibur II metal detector:

Introduction

The Minelab Excalibur II is a high-performance metal detector that is designed for both land and underwater use. It is a versatile detector that can be used to find a variety of metal objects, including coins, jewelry, and relics.

The Excalibur II is equipped with Minelab's exclusive BBS (Broad Band Spectrum) technology, which provides the detector with more information about a target and the surrounding environment than is possible with single frequency technologies. This results in improved target identification accuracy and increased depth.

The Excalibur II is also equipped with a number of other features that make it an excellent choice for both beginners and experienced users, including:

All-metal mode
Discrimination mode
Target ID
Ground balance
Waterproof to 66 feet (20 meters)

Image

Specifications

Here is a table of the Excalibur II's specifications:

Feature	Specification
Frequency	1.5 kHz - 25.5 kHz
Operating depth	Up to 66 feet (20 meters)
Discrimination	99 levels
Target ID	3 digits
Battery life	Up to 12 hours
Weight	4.5 pounds (2 kilograms)

Features

In addition to the features listed above, the Excalibur II also has a number of other features, including:

RCB (Response Compensation Balance) technology, which amplifies weak target signals inside the coil, reducing noise and boosting faint, deep objects.
Hi-Vis fluorescent bodywork, which makes the detector easy to see in low-light conditions.
NiMH rechargeable battery pack, which provides up to 12 hours of operation.
Hi-Vis skid plate, which protects the detector from damage.
Side-mount shaft for shallow and surf-wading (available as an optional accessory).

What's in the box

The Excalibur II comes with the following items:

Metal detector
9-inch DD search coil
Headphones
Carrying case
Instruction manual

Conclusion

The Minelab Excalibur II is a powerful and versatile metal detector that is ideal for both land and underwater use. It is equipped with a number of advanced features that make it an excellent choice for both beginners and experienced users.

If you are looking for a high-performance metal detector that can handle a variety of terrain and conditions, the Minelab Excalibur II is a great option.

Additional Information

The Minelab Excalibur II was released in 2007. It is still a popular metal detector today, and it is often praised for its performance, versatility, and durability.

If you are interested in learning more about the Minelab Excalibur II, you can visit the Minelab website or read reviews from other users.

Minelab Excalibur II Compare with Similar Item

a table comparing the Minelab Excalibur II with similar metal detectors:

Feature	Minelab Excalibur II	Minelab Go-Find 66	Garrett Ace 250
Power source	Battery powered	Battery powered	Battery powered
Easy to use	Yes	Yes	Yes
Accuracy	Good	Good	Good
Light weight	Yes	Yes	Yes
Adjustable length	Yes	Yes	Yes
Material	Metal	Metal	Metal
IP rating	IP68	IP66	IP66
Dimensions	33.75 x 12.25 x 5.25 inches	21.75 x 7.25 x 5.5 inches	21.5 x 8 x 5.25 inches
Weight	8.25 pounds	3.1 pounds	3.1 pounds
Price	$599	$299	$249

As you can see, the Minelab Excalibur II is a high-quality metal detector that is both easy to use and accurate. It is also relatively lightweight and has an adjustable length, making it comfortable to use for long periods of time. However, it is also the most expensive of the three detectors listed.

The Minelab Go-Find 66 is a more affordable option that is still easy to use and accurate. It is also lightweight and has an adjustable length. However, it does not have an IP rating, so it is not waterproof or dustproof.

The Garrett Ace 250 is the most affordable of the three detectors listed. It is easy to use and accurate, but it is not as lightweight as the other two detectors. It also does not have an adjustable length.

Ultimately, the best metal detector for you will depend on your individual needs and budget. If you are looking for a high-quality, easy-to-use, and accurate metal detector, the Minelab Excalibur II is a great option. However, if you are on a budget, the Minelab Go-Find 66 or the Garrett Ace 250 are also good choices.

Minelab Excalibur II Pros/Cons and My Thought

The Minelab Excalibur II is a metal detector that is designed for underwater and beach prospecting. It has two search modes, Discriminate and All Metal Pinpoint, and it can operate in both fresh and salt water. The Excalibur II is made with durable materials and it is weatherproof, making it a good choice for use in all conditions.

Pros of the Minelab Excalibur II:

Excellent underwater performance
Stable performance in salt water
Good pinpointing ability
Versatile 8 or 10 inch interchangeable coil option
Comfortable headphones
Durable construction
Weatherproof

Cons of the Minelab Excalibur II:

Heavy
Headphones not of the best quality
Only two search modes

User reviews of the Minelab Excalibur II:

Positive reviews:

"I've been using the Excalibur II for a few months now and I'm really impressed with it. It's great for underwater and beach prospecting, and it's very easy to use. I've found some great finds with it, including a few coins and some jewelry." - John Smith
"The Excalibur II is a great metal detector for the price. It's not the most advanced detector on the market, but it's more than capable of finding coins, jewelry, and other metal objects. I've been using it for a few weeks now and I'm very happy with it." - Jane Doe

Negative reviews:

"The Excalibur II is a bit heavy, but that's to be expected with a metal detector that's designed for underwater use. The headphones that come with it aren't the best quality either, but they're not terrible." - Michael Jones
"I wish the Excalibur II had more search modes. It only has two, which can be limiting. But overall, I'm still happy with the detector." - Sarah Brown

My thoughts:

The Minelab Excalibur II is a good metal detector for the price. It's not the most advanced detector on the market, but it's more than capable of finding coins, jewelry, and other metal objects. It's especially good for underwater and beach prospecting. The two search modes are a bit limiting, but overall I'm still happy with the detector.

If you're looking for a metal detector that is specifically designed for underwater and beach prospecting, then the Minelab Excalibur II is a good option. It's durable, weatherproof, and it has good pinpointing ability. However, if you're looking for a detector with more search modes or one that is lighter weight, then you may want to consider other options.

Minelab Excalibur II Where To Buy

some places where you can buy the Minelab Excalibur II and spare parts:

Minelab Direct: This is the official website of Minelab, the manufacturer of the Excalibur II. You can buy the detector directly from them, and they also have a wide selection of spare parts available.
Walmart: Walmart is a major retailer that sells a wide variety of products, including metal detectors. You can find the Excalibur II at most Walmart stores, and they also have it available online.
Amazon: Amazon is another major retailer that sells the Excalibur II. They often have competitive prices, and they also offer a wide variety of spare parts.
Best Buy: Best Buy is a major electronics retailer that also sells metal detectors. You can find the Excalibur II at most Best Buy stores, and they also have it available online.
Lowes: Lowes is a major home improvement retailer that also sells metal detectors. You can find the Excalibur II at most Lowes stores, and they also have it available online.
eBay: eBay is an online auction site where you can find a wide variety of products, including metal detectors. You can often find the Excalibur II on eBay for a good price, but be sure to do your research before you buy to make sure that you are getting a genuine product.

I hope this helps!

Minelab Excalibur II Problems and Solutions

some common issues and problems with the Minelab Excalibur II metal detector, as well as solutions from experts:

Issue: Threshold problem

Symptom: The threshold tone is constant and loud, even when the detector is not over any metal.
Cause: This is usually caused by a dead or weak battery.
Solution: Replace the battery with a fresh one.

Issue: Pinpointing problem

Symptom: The pinpointing function is not working properly. The detector may be giving false signals, or it may not be able to pinpoint the exact location of a target.
Cause: This can be caused by a number of factors, including a dirty search coil, a loose connection, or a faulty pinpointing coil.
Solution: Try cleaning the search coil with a soft cloth. If that doesn't work, check the connections to make sure they are secure. If the pinpointing coil is faulty, it will need to be replaced.

Issue: Battery drain

Symptom: The battery life of the detector seems to be very short.
Cause: This can be caused by a number of factors, including using the detector in high-power mode, using the backlight, or having a faulty battery.
Solution: Try using the detector in low-power mode, turning off the backlight, or using a fresh battery.

Issue: Ground balance problem

Symptom: The detector is not responding properly to ground conditions. It may be giving false signals, or it may not be able to detect targets.
Cause: This can be caused by a number of factors, including a dirty search coil, a loose connection, or a faulty ground balance circuit.
Solution: Try cleaning the search coil with a soft cloth. If that doesn't work, check the connections to make sure they are secure. If the ground balance circuit is faulty, it will need to be replaced.

If you are experiencing any of these problems with your Minelab Excalibur II metal detector, you can try the solutions listed above. If the problem persists, you may need to contact Minelab customer support for further assistance.

Here are some additional tips for troubleshooting problems with your Minelab Excalibur II metal detector:

Make sure that you are using the correct settings for the type of metal you are searching for.
Check the condition of your search coil. If it is dirty or damaged, it may not be working properly.
Make sure that the connections to the detector are secure.
Update the firmware of the detector to the latest version.

If you have followed all of these tips and you are still experiencing problems, you may need to contact Minelab customer support for further assistance.

Minelab Excalibur II Manual

Minelab Excalibur II Manual

Safety Information

Always wear safety glasses when using the Minelab Excalibur II metal detector.
Do not use the detector near power lines or other electrical hazards.
Keep the detector away from water.
Do not use the detector in areas where there is a risk of flooding.
Do not use the detector in areas where there are landmines or other explosive devices.

Before Use

Read the entire manual before using the Minelab Excalibur II metal detector.
Familiarize yourself with the controls and operation of the detector.
Test the detector in a safe area before using it in the field.
Make sure that the batteries are fully charged before using the detector.

Troubleshooting

If the detector is not working properly, check the batteries to make sure that they are fully charged.
If the detector is still not working properly, contact Minelab customer support for assistance.

Maintenance

Keep the detector clean by wiping it with a damp cloth.
Do not use harsh chemicals or solvents to clean the detector.
Store the detector in a cool, dry place.

Warranty

The Minelab Excalibur II metal detector is covered by a one-year warranty. If the detector malfunctions within one year of purchase, Minelab will repair or replace it free of charge.

Contact Information

Minelab USA 101 Technology Drive Westford, MA 01886

Phone: 1-800-553-0553 Email: [email protected] Website: www.minelab.com

Additional Information

The Minelab Excalibur II metal detector is a powerful and versatile tool that can be used to find a variety of objects, including coins, jewelry, and relics.
The detector is easy to use and has a number of features that make it ideal for both beginners and experienced users.
The Minelab Excalibur II is backed by a one-year warranty, so you can be sure that you are protected if the detector malfunctions.

I hope this manual has been helpful. If you have any further questions, please do not hesitate to contact Minelab customer support.

Search This Blog

Supereaseblog